Quickie Pulse Manuel de service télécharger pdf (Page 54)

PULSE 6 SERVICE MANUAL

PAGE 7.7

2009SUNRISE MEDICAL

Section 7

Shock Removal

The shocks used in this power base are pre-

adjusted at the factory. Contact Sunrise Medical

Technical Service if adjustment is required.

1. Remove the batteries. Refer to the Battery

Removal section of this manual.

2. Remove the motor/gearbox assembly from

the side on which you are removing the shock.

Refer to Motor/Gearbox Removal section of this

manual.

3. Use a 17 mm wrench and remove the top

bolt securing the shock to the base (ﬁ g. 7.20).

4. Use two 19 mm wrenches and remove

the bottom nut and bolt securing the shock to the

base (ﬁ g. 7.21 & 7.22).

5. Lift the shock from the base.

6. Reverse the previous procedures to install

the shock.

Removal Procedures (cont.)

fig. 7.20

fig. 7.21

fig. 7.22

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60 61 62

Commentaires sur ces manuels

Pas de commentaire