Quickie 2HP Guide de dépannage télécharger pdf (Page 18)

IX. DEALER SERVICE AND ADJUSTMENT

WARNING

The owner of this chair is responsible for makiing sure that it has been setup and adjusted by a trained serv-

ice professional under the advice of a healthcare advisor. Service and/or adjustments should only be done

with the advice of a healthcare professional. Always use parts and/or accessories that have been recom-

mended and approved by Sunrise Medical when servicing this chair.

A. DEALER SERVICE INTRODUCTION

1. At least once per year, this chair should have a complete inspection, safety check, and regular service

made by an authorized dealer.

2. Torque settings– A torque setting is the optimum tightening which should be made on a particular fas-

tener. It is important to use proper torque settings where specified. When not specified, torque set-

tings should be 60 in-lbs

3. If you have discovered a worn, bent, or damaged part, repair or replace them with recommended parts

before returning this chair to service.

4. All major maintenance and repair work should be done by the authorized dealer.

B. CRITICAL MAINTENANCE TIPS

1. Torque settings:

A torque setting is the optimum tightening which should be made on a particular fastener. It is important to

use proper torque settings where specified. When not specified, torque settings should be 60 in-lbs

2. Dealer Service and Adjustment Reference materials:

Go to www.sunrisemedical.com for parts manuals, instruction sheets, and instructional videos that will aid in

the repair of the Quickie 2 Family of wheelchairs.

C. CLEANING

1. Paint Finish

a. Clean the painted surfaces with mild soap or detergent.

b. Protect the paint with a coat of non-abrasive auto wax.

2. Axles and Moving Parts

a. Clean around axles and moving parts with a slightly damp (not wet) cloth.

b. Wipe off or blow away any fluff, dust or dirt on axles or moving parts.

c. DO NOT USE 3 in 1 oil, or WD-40 ® for lubrication. Only use Teflon based Lubricant when working

on this wheelchair.

D. REAR AXLES AND AXLE PLATES

The most important adjustment on the Quickie wheelchair is the position of the rear axle. The center of

gravity, wheel camber and wheelbase are all determined by the axle adjustment.

Use a torque setting of 144 in.-lbs. when adjusting rear axle.

WARNING

The more you move the rear wheels forward, the more likely the chair will tip over backwards. Always make

adjustments in small increments, and check the stability of the chair with a spotter to prevent a tip-over. We

recommend that anti-tip tubes are always used in conjunction with this type of adjustment.

1. Center of Gravity

Moving the center of gravity to the front will lighten the force required to turn the chair. The further back the

axle, the more stable the chair becomes.

The center of gravity is adjusted by moving the rear axle (A) forward or backward on the indexed axle plate

(B). Moving the axle forward will increase your turning speed and lighten the front end.

2. Wheel Camber

The wheel camber adjustment provides greater side-to-side stability due to the increased width and angle of

the wheelbase. The wheel camber adjustment also allows for quicker turning and greater access to the top of

the handrims.

Wheel camber is preset at the factory at 3° for the Quickie 2 and 5° for the Quickie 2HP. More or less cam-

ber can be obtained by increasing or decreasing the number of camber washers (C) located between the axle

plates and the frame.

NOTE–

Adjusting your chair’s center of gravity will require re-adjusting the location of the wheel locks

(if provided). See Section T for instructions on adjusting the wheel locks.

ENGLI S H

128226 Rev. A

TOOLS YOU WILL NEED

1. Imperial Hex key set

2. Metric Hex key set

3. Imperial Open-end Wrench set

4. Metric Open-end Wrench set

5. Torque wrench

6. Imperial Hex bit Socket set

7. Metric Hex bit Socket set

8. Phillips and Flat screwdrivers

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Broan BRQT236WW Scheda delle Specifiche (1 pagine)

Marchio: Broan | Categoria: No info | Dimensione: 0.11 MB |

Indice

QUIET HOOD

CONVERTIBLE

RANGE HOODS

Più prodotti e manuali per no Broan

Modelli	Tipo di Documento
MP140	Guida di Installazione Broan MP100 Installation Guide, 8 pagine
NDK35836WW	Guida di Installazione Broan NDK35830SS Installation Guide, 4 pagine
SP140	Scheda delle Specifiche Broan SP100 Spec Sheet, 2 pagine
670	Scheda delle Specifiche Broan 670 Specification Sheet, 2 pagine
L400K	Guida di Installazione Broan L400K Installation Guide [no] , 12 pagine
SP100	Scheda delle Specifiche Broan SP100 Specification Sheet, 2 pagine
437	Guida di Installazione Broan 437 Installation Guide [da] [sv] , 1 pagine
510	Scheda delle Specifiche Broan 510 Specification Sheet, 1 pagine
BRP5	Scheda delle Specifiche Broan BRP5 Specification Sheet [pt] , 4 pagine
512	Guida di Installazione Broan 512 Installation Guide [pl] [sk] [sk] , 2 pagine
EQLD130SS	Manuale Utente Broan EPLEC130SS Controls, 1 pagine
AEEPD18SS	Guida di Installazione Broan AEEPD6SS Installation Guide, 4 pagine
F402422	Scheda delle Specifiche Broan F403022 Spec Sheet [da] , 1 pagine
QTXE080	Scheda delle Specifiche Broan QTXE080 Specification Sheet, 2 pagine
L200MG	Scheda delle Specifiche Broan L200MG Specification Sheet, 2 pagine
508	Guida di Installazione Broan 508 Installation Guide, 4 pagine
332KR	Scheda delle Specifiche Broan 332KR Specification Sheet, 2 pagine
BR335	Guida di Installazione Broan BR335 Installation Guide, 12 pagine
463608	Scheda delle Specifiche Broan 463608 Spec Sheet, 1 pagine
437	Scheda delle Specifiche Broan 437 Specification Sheet, 2 pagine

Quickie 2HP Guide de dépannage Page 18

Commentaires sur ces manuels

Broan BRQT236WW manuali

Broan BRQT236WW Scheda delle Specifiche (1 pagine)

Indice

Più prodotti e manuali per no Broan

Quickie 2HP Guide de dépannage Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Poussettes Quickie 2HP

Broan BRQT236WW manuali

Broan BRQT236WW Scheda delle Specifiche (1 pagine)

Indice

Più prodotti e manuali per no Broan