Quickie Pulse Manuel de service télécharger pdf (Page 49)

PULSE 6 SERVICE MANUAL

PAGE 6.3

SEPT 2011SUNRISE MEDICAL

Section 6

8. Measure the resistance of the park brake

assembly by connecting a Multimeter to the small

pins of the 4-pin connector (ﬁ gure. 6.3.1). Normal

resistance is approximately 12 to 15 ohms.

9. Measure the resistance through the motor brush

assembly and motor by connecting a Multimeter

to the large pins of the 4-pin connector (ﬁ gure.

6.3.2). Normal resistance is approximately .5 to

.9 ohms.

Note: New brush readings may be different

than those recorded above. The new brush

assemblies should be run-in prior to measuring

their resistance. Contact Sunrise Technical

Service if the readings are either signiﬁ cantly

higher or lower than those recorded above.

Motor/gear Box Inspection (cont.)

fig. 6.3.1

fig. 6.3.2

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 71 72

Pas de commentaire

Quickie Pulse Manuel de service Page 49